Dyo Nanoteak Teak Oil 2.5 Liters

Features
Provides excellent UV resistance and water resistance thanks to its special formulation. It is easy to be absorbed by wood. It does not disrupt the natural texture of the wood, allows it to breathe, and gives the wood a decorative appearance.

Application Description
The surfaces to be applied must be cleaned of oil, dirt, resin and dust, and must be completely cleaned of old paint or varnish residues. Before applying on hard woods containing resin and natural oils, the surface should be wiped with DYO Cellulosic Thinner to clean it from oil.
Dyo Nanoteak Teak Oil is ready for use. A flat brush and a clean and dry cloth are sufficient for application. Mix well before application. In order to obtain a homogeneous appearance, the application should be done in the direction of the grain of the wood and applied with an equal amount of brush, and the wood should be saturated with oil. Excess oil remaining on the surface should be wiped off with a clean cloth after approximately 15-20 minutes.
Usually a single coat application is sufficient. However, two coats of application are recommended for wood with high absorbency and in areas exposed to harsh weather conditions. It dries to the touch in 4 hours, and the waiting time between coats is 12-24 hours.
After application, brushes and tools can be cleaned with Dyo Synthetic Thinner.
 
How Much Area Does It Paint?
Depending on the type of wood on which it is applied, 18-20 m2 of area can be covered with 1 L in a single coat.