Selsil Insulation Adhesive Foam 850 gr

Adhesive Foam
It is a single-component polyurethane assembly foam that hardens with the humidity of the air and can be used for bonding thermal insulation boards (Polystyrene

Features

It is a single component.
It cures with the humidity of the air.
It provides excellent adhesion to many building materials
It can be cut and painted after curing.
It should not be exposed to UV and should be covered with paint or plaster.
It is applied with a gun.
Tube replacement can be done faster.
It is easy to apply.
Less cleaning is required.
Application and Area of Use
Points to consider in Selsil Adhesive Foam application;
Application temperature: min. +5 °C
Temperature Resistance: -40 °C to +100 °C
• Before application, old coatings that are thought to be unstable on the structure to be bonded are scraped and smoothed with surface repair mortars.
• The surface to be applied must be hard, clean and free from oil and dirt. If it is not clean enough, the surface can be cleaned with pressurized water.
• Dry surfaces should be moistened before starting the process.
• The foam should be shaken homogeneously 30 times before starting to squeeze. Low-temperature cans should be kept at room temperature for 20 minutes before use.
• It is used for insulation panels, decorative pieces, and also for filling gaps and cracks.