Pinosan Cellulosic Parquet Filler Varnish 2.5 LT

PRODUCT FEATURES

It is a nitrocellulose-based single-component filling varnish.
By filling the pores and joints of the wood and parquet, it prevents the final coat varnishes to be applied on it from being absorbed by the wood, creating a smooth floor and saving time and materials.
APPLICATION METHOD AND AREA THAT CAN BE PAINTED

Specially formulated to be used on all kinds of wood, wood veneer and parquet surfaces.
The surface should be cleaned and sanded if necessary.
It is ready for application. It does not require thinning.
Apply with brush or roller in two or three layers depending on the absorbency of the surface. It is recommended to wait 20-30 minutes between coats. Depending on the ambient temperature, it can be sanded after 1-2 hours.
Depending on the surface in two coats;
*    3.5-7.5 m² of surface is covered with 0.75 L.

**   12.5-22.5 m² of surface is covered with 2.5 L.

*** 60-100 m² of surface is covered with 12 L.