Pinosan Parquet Varnish Glossy 0.75 LT Glass Polish

PRODUCT FEATURES

Urethane alkyd based, single component, glossy parquet varnish.

Its resistance to scratches and impacts is excellent.

Protects the applied surface against chemicals.

APPLICATION METHOD AND AREA THAT CAN BE PAINTED

Used on parquet and all kinds of wooden surfaces.

The surface must be dust-free, dry and clean.

On dry and clean new parquet surfaces, Pinosan Cellulosic Parquet Filler Varnish should first be applied in two layers with an interval of 1-2 hours and light sanding should be done after sufficient drying.

It is ready for application. Does not require thinning.

Apply with brush or roller in two or three coats depending on the absorbency of the surface. The first coat should be thinned with 10-15% Dyo Synthetic Thinner to ensure that the varnish penetrates the surface well. It is recommended to wait 5-6 hours between coats and sand any roughness.

It dries hard after 24 hours and gains its physical and chemical resistance within 3-4 days.

Depending on the surface in two layers;

* 6-7 m² of surface is covered with 0.75 L.

** 20-23 m² of surface is covered with 2.5 L.

*** 15 L covers a surface of 120-138 m².

**** 65 – 98 m² of surface is covered with 12 kg.